You have arrived at the homepage of the worlds largest selection of pyrotechnic & special effects supplies under one roof!

HOME
Prototyping Exotic Hardware Explosive Targets DIY Kits Rocketry Tooling Novelty Fireworks Free Stuff Specials Surplus
Adhesives Display Materials Chimfire Defense Nitrocellulose NC Lacquer 169 Polymers, & Curatives Ignition Supplies 26.5 & 37mm Materials Color Smoke Materials Chemicals & Metals Cast Bullet & Bore Lube Plastics Signal Components Special FX
Rules Dealer Opportunities
First Order Ordering Info Order Form Shipping Review Order
ABOUT

BUY KITS TO MAKE COLOR SMOKE CANS, ELECTRIC IGNITERS, WHISTLES, COMPOSITE SMOKE & EMERGENCY FIRESTARTERS

Note: For instructions on using the shopping cart, click here.

Color Coding:

Green - means that particular item is not hazardous whatsoever.


Orange - means that item is normally hazardous, but we can ship it without a hazmat fee (you must pay the 1 lb price for it though)


Red - means that the item must be shipped hazardously, regardless of qty ordered.


<==============================>

If you are placing an order with us online, you must be on file with us, regardless of what your first order is. This means that we have to have a signed in ink order form and a copy of your driver's license on file. If you do not have these things on file with us, it will just delay your order. You only have to do it once and then you can order whenever you would like. Go to our order form page to print out the order form there. Then you can use that to fill out and send in.

<==============================>

If at any time you want to review your order so far, please click below.

CART
dscn1944.jpg (192473 bytes)

100 PULL STRING FRICTION IGNITERS - MATCHLESS IGNITION SYSTEM

Make foolproof sure fire pull cord igniters for less than 32" each! Each kit contains enough materials to make 100 pull cord igniters with fuse barrel! Easily the best value anywhere! Comes with friction mix and ignition cup pyrogen (less oxidizer). Simply mix a very small amount of potassium chlorate into the ignition cup pyrogen and coat cup. Then coat end of cord with friction mix, allow to dry and staple into paper fuse barrel - simple! Only takes a few minutes per dozen. Also required that are not included in kit is a 1/4" Bostitch plier type stapler (Google it). We use a bostich model P3 staple pliers and SP-19 1/4" staples. Stapler and staples available from office supply stores everywhere. Comes with complete instructions and diagrams.

Note; the kit no longer comes with pre-cut tubes, instead, they are black and yellow and you cut them to length yourself.

KT100 -

$32.50/KIT

- 1LB/KIT - FS

Non hazmat shipping by UPS or USPS

ORDER

50 FRICTION STRIKER IGNITERS - MATCHLESS IGNITION SYSTEM


Make enough friction striker igniters to ignite 50 devices for less than 50" each! Excellent for emergency survival firestarters! Use to ignite smoke devices, signal hand flares, thermite pellets, delay devices of all kinds, etc. Comes with friction striker mix and ignition cup pyrogen. Add a small quantity of potassium chlorate to the ignition pyrogen, mix and coat directly onto fuse, flare comp, etc. One strike from the striker on a book of matches ignites the device - simple! Comes with complete instructions with diagrams of various ignition system and miscellaneous materials to complete 50 or more igniters with strikers.

KT150 -

$24.50/KIT

- 1LB/KIT - FS

Non hazmat shipping by UPS or USPS

NOW BACK IN STOCK!
ORDER

9 LARGE TACTICAL SMOKE CANDLES - LOW HEAT - HIGH SMOKE VOLUME - COLORS & WHITE

Make 9 large tactical smoke canisters

for less than $4.80 (white) or $6.45 (color) each!! For those of you who need volumes of richly colored or cloud white smoke, here is the kit you need. Great for paramilitary/paintball games, police and firemen training, checking wind drift, special effect stage effects or signaling. Easy step by step instructions to follow. All you do is add potassium chlorate (now supplied in kits making 9 devices), mix and assemble the devices. Comes with long cut-to-length casings, solid discs, seating rings, punched vent discs, outer finish caps and smoke mixture. Also required (not supplied) is adhesive, safety fuse and/or pull wire or friction striker igniters (order the kits and save).

Kit no longer comes with color pre-cut tubes. They are now longer, natural kraft that you cut to spefications.

Note; Our smoke colors are by far the best rich, vibrant colors available!

The tube colors depicted here are accurate colors! The casings are 2" inside diameter and produce enough smoke to simulate tactical military devices!

No ATFE required to order these kits with tubes.

dscn2157.jpg (165800 bytes)

KT200/R - RED 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/W - WHITE 2” ID X 4 1/2” L W/HARDWARE -

47.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/B - BLUE 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/G - GREEN 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/Y - YELLOW 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/V - VIOLET 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER
dscn2157.jpg (165800 bytes)

KT200/O - ORANGE 2” ID X 4 1/2” L W/HARDWARE -

$58.00/KIT - 4 LB/KIT

Makes 9 large tactical devices.

Non hazmat shipping by UPS or USPS

ORDER

25 LARGE THERMITE EMERGENCY FIRESTARTERS - MATCHLESS FRICTION STRIKER IGNITION

Make matchless thermite igniters! Now start emergency campfires or metal cutting without electricity or matches! Can also be used to cut off rusty locks the easy way! Sure fire ignition in any weather without matches and slowly combusts to produce heat and molten alloy metal in excess of 3000F. Placed on wood and tinder, it will start even moist wood on fire. Keep them in glove or tool box and in the personal survival kit. Great for hunting and hiking! Kit comes with enough thermite, friction cup ignition mix, tubes and plugs to construct 25 large devices. Comes with instructions. Uses discarded strikers on books of matches to ignite.

Kit no longer comes with pre-cut tubes. They are now longer to cut to spefications.

No ATFE required to order this kit with tubes.

KT250

- $32.00/KIT

- 3LB/KIT - FS

Non hazmat shipping by UPS or USPS

NOW BACK IN STOCK!

ORDER

PYROTECHNIC WHISTLE CONSTRUCTION SETS - EAR PIERCING AUDIBLE EFFECTS

This unique kit has everything needed (less safety fuse) including tool set to construct and enjoy 30 ear piercing whistles. Simple and foolproof! Kit contains; enough longer tubes (you cut to length) for 30 casings (3/8" ID), 30 bottom plugs, reusable tool set, chemicals and complete instructions. Amaze everyone - use them in combination with other effects for dazzling results or attach a guide stick (long enough to balance at open end of tube) and launch them like high power bottle rockets! For best results, use and arbor press, hydraulic press or similar to compress the mixture with a case reinforcing sleeve in place to support the tube - stock #CRS2Z (not supplied).

Kit no longer comes with pre-cut tubes. They are now longer to cut to spefications.

No ATFE required to order this kit with tubes.

KT300

- $23.50/KIT

- 2LB/KIT - OX

Non hazmat shipping by UPS or USPS

NOW BACK IN STOCK!

ORDER

CYCLONE™ RC ELECTRIC MATCH PRODUCTION SET - LOW VOLTAGE

Similar in construction to the famous Davey Fire match but designed to produce results unequaled anywhere, our Cyclone™ RC Electric match ignites flawlessly on as little as 1.5 volts - .5 amperes (single alkaline AA battery) and combusts for 1-2 seconds at over 2000 DEGREES F emitting lots of sparks and molten slag to ignite stubborn compositions or devices.

Very impressive!

The kit comes with everything needed including bridgewire chips to produce 50 igniters with 12” leads. Very easy, simply solder element “chip” to lead, mix pre-measured pyrogen and dip igniter followed by a final dip in lacquer sealant - all included. Excellent for remote control use! Average resistance is 1.3 ohms. Non explosive ignition!

All you need is solder, Ruby Fluid soldering fluid and soldering iron.

No ATFE required to order this kit with tubes.

KT500

LOW VOLTAGE RC MATCH SET

- $35.00/kit

- (1lb/kit)

Non hazmat shipping by UPS or USPS

NOW BACK IN STOCK!

Compare ours to kits available elsewhere!

ORDER

COMPOSITE SMOKE PRODUCTION PACKAGE

Here's your chance to get all the basics needed to produce high volume composite plastic resin smoke compositions that generate

huge volumes of rich, dense smoke at a greatly reduced price!

ADVANTAGES:

  1. Resin binder greatly reduces hygroscopicity, thus increasing shelf life many times

  2. Can be molded into most any shape before curing into it's rubberlike final state

  3. Can be stored and used most anywhere

  4. Generates huge quantities of thick, rich, dense smoke

  5. By adding an insecticide (not included), can be used to rid buildings, cellars, even campsites or backyards from most any crawling or flying insects - anywhere the smoke drifts! Instructions included

  6. Comes with enough chemicals to produce approx 10 lbs of rubberlike smoke composition with chemicals left over! Simply order more key chemicals (oxidizer, zinc oxide, hexachloroethane and ammonium chloride) to produce up to...

75 lbs of composite smoke mix!

Comes with complete, illustrated instructions and enough chemicals, binders and curatives to get you started.

Here's what you get:

Complete, illustrated instructions booklet with formulations

1 gallon PBAN resin, carboxyl terminated

1 Quart 2-Ethylhexyl acrylate, liquid plasticizer

16 oz epoxy resin, curative (or similar curitive, at our discretion)

1 lb Ferric Oxide, burn rate catalyst

4 lbs Ammonium perchlorate, oxidizer

1 lb Ammonium chloride

1 lb Zinc oxide

1 lb Hexachloroethane

1 oz Curing catalyst

Material safety data sheets on all chemicals

A total value of over $129.00

You Save 10%

Yours for only $116.10

Package weight - 20 lbs

Shipping nature - Oxidizer - ORM-D      

Ships by US Mail with no hazmat fee

ORDER

Stock #

PKGSMK/W

dscn2152.jpg (176967 bytes)

HTPB & PBAN ROPELLANT PACKAGES

EACH KIT INCLUDES ENOUGH MATERIALS TO MAKE APPROX. 6 LBS OF PROPELLANT WITH CHEMICALS LEFT OVER! SIMPLY PURCHASE MORE OXIDIZER TO PRODUCE UP TO 75 LBS OF PROPELLANT!

THE HTPB KIT COMES WITH THE FOLLOWING:

142 PG. MANUAL - "PLASTIC RESIN BONDED ROCKET FUEL SYSTEMS" - VERSION III
1 GALLON R-45 HTPB, RESIN, HYDROXYL TERMINATED
1 QT 2-ETHYLHEXYL ACRYLATE, LIQUID PLASTICIZER
8oz ISOPHORONE DIISOCYANATE, CURATIVE
8oz HX-878 BONDING AGENT
1 LB FERRIC OXIDE, BURN RATE CATALYST
2 LBS 200 mic AMMONIUM PERCHLORATE, OXIDIZER
2 LBS 60-130 mic down superfine AMMONIUM PERCHLORATE, OXIDIZER

ALL THIS, A TOTAL VALUE OF OVER $194.15!

You Save 10%

YOURS FOR ONLY $174.75!!

No ATFE required to purchase - Non-hazmat shipping bu US Mail

SHIPPING WT - 19 LBS SHIPPING CLASS - OXIDIZER

STOCK #

PKGHTPB

ORDER dscn1888.jpg (173175 bytes)

THE PBAN KIT COMES WITH THE FOLLOWING:

142 PG. MANUAL "PLASTIC RESIN BONDED ROCKET FUEL SYSTEMS" -VERSION III
1 GALLON PBAN, RESIN, CARBOXYL TERMINATED
1 QT 2-ETHYLHEXYL ACRYLATE, LIQUID PLASTICIZER
8 oz EPOXY RESIN, CURATIVE
8oz HX-878 BONDING AGENT
1 LB FERRIC OXIDE, BURN RATE CATALYST
2 LBS 200 mic AMMONIUM PERCHLORATE, OXIDIZER
2 LBS 60-130 mic down superfine AMMONIUM PERCHLORATE, OXIDIZER

ALL THIS, A TOTAL VALUE OF OVER $166.35!


You Save 10%

YOURS FOR ONLY $149.70!!

No ATFE required to purchase - Non-hazmat shipping bu US Mail

SHIPPING WT -20 LBS
SHIPPING CLASS - OXIDIZER
STOCK #

PKGPBAN

ORDER dscn1891.jpg (172637 bytes)

For Specifics on each package, see the following link:

Link - Rocket Supplies

FIREFOX ENTERPRISES LLC
11612 N. NELSON
POCATELLO, IDAHO 83202

firefox-fx@hotmail.com
Order & Information Lines:

1 (208) 251-7415          1 (208) 909-8173