If at any time you want to review your order so far, please click below.
Shipping Legend;DW=Dangerous When Wet; SC=Spontaneously Combustible; OX=Oxidizer; FS=Flammable Solid; FL=Flammable Liquid; PM=Poisonous Material; CM=Corrosive Material; AG=Aerosol Gas; ORM=ORM-D (can be shipped with other hazmat items, but is not hazardous itself unless shipped by air).
For our safety as well as yours, we ship everything according to regulations. The DOT has no sense of humor!
Note: For instructions on using the shopping cart, click here.
Chemical Color Coding: Green - means that particular item is not considered hazardous. However, items that are listed as ORM-D CANNOT be shipped to other countries (no international shipping). E-mail us if you have a question on a partcular item. ORM-D's are not considered hazardous by ground service. Orange - means the item is normally hazardous, but we can ship it without a hazmat fee (in 1 lb quanities, up to approx 20 lbs, at the 1 lb price by USPS). Red - means that the item must be shipped as a hazmat item, regardless of the quantity ordered. Blue - Requires a DOT-E-8249 Exemption box and hazmat fees. Magnesium and magnallium so indicated in blue must be picked up at our warehouse or shipped by motor freight.
For the MSDS information buttons, please realize these may or may not be the same ones that come with your order. We have them included here for your convenience and they are pulled from the internet, not necessarily from the manufacturer that we get the material from. Some of the buttons are not yet activated.
Nickel (II) Nitrate, Reagent hexahydrate; [Ni(H2O)6](NO3)2] Nickelous nitrate; Nitric acid nickel (2+) salt;
Stock # C162NN - OX
Water soluble emerald green flake/crystals, strong oxidizer (O= 52.54%) used for nickel plating; electrolytic zinc coatings; color for ceramics and glass; battery production; as an experimantal pyrotechnic oxidizer; burn rate catalyst in rocket propellants and other pyrotechnic formulations. Highly soluble in water and in ethanol. Add this to your inventory of hard to find exhotic chemicals!
$49.00/ lb
$239.00/ 5 lbs
High quality reagant crystals
Nitrocellulose/Polyester Fuse Coating, NC/PE thick butyrate invarious colors (see stock #'s for corresponding color), Ship ORM-D, Non-Hazmat.
Looking for a better safety fuse coating agent for use with our fuse machines, Firefox researched, experimented and came up with solutions to a couple of potential problems that standard Nitrocellulose lacquer has when coated on safety fuse. As most of us have experienced, NC lacquer can burn off ahead of the burning fuse powder core making it dangerously liabel. I have had premature device ignition caused by the flaming lacquer before the burning fuse core actually made contact with the primary composition, thus effectively eliminating the essential delay. Secondly, some NC lacquers become brittle in prolonged storage. This is most likely caused by insufficient or a complete lack of a stabilizer added to the lacquer. Aging brittle fuse will crack when bent allowing moisture in and ignition failure, especially when using in moist atmospheres or underwater. The answer is our field tested Nitrocellulose/Polyester Fuse Coating. We start with a high solids loadings NC lacquer, blend in a soluble polyester resin which improves flexability, aging and effectively reduces lacquer burnoff. Then a nitro group stabilizer is added to guard against decomposition and increase shelf life almost indefinately. This NC/PE lacquer is viscous and dries rapidly so it only has time to soak into the cotton fibers of the fuse and not the powder core. Can also be used to coat blackmatch, quickmatch, homemade Thermolite Ignitercord, as an electric match overcoat and similar useage. Ship weight is 3 lbs per quart. Note; Many different shades of color may be obtained by thinning with our clear lacquer. Primary colors may be blended to make more colors.
Standard nitrocellulose lacquers are listed after the solid nitrocellulose below
Standard nitrocellulose lacquers are listed after the solid nitrocellulose below
Nitrocellulose, Solid 12.3-12.5% Nitrogen,RS 5.0 to 6.5 sec 4000 series 25% water - [C6H7N3O11] Stock #C163/NCS - FS Shipped as an ORM-D
Shipped moist according to regulations - simply dry and disslove in Acetone, n-butyl acetate or M.E.K. for 'lacquer'. 1 to 1.75oz
NC/qt of Acetone for binder for stars, smoke, igniters, etc.; 3.5oz/qt of
Acetone for thick concentrate. 1 lb makes up to approx 4 gallons of solution. Maximum absorbtion is approx 4.5 to 5.0 oz NC per quart for a jelly-like viscosity. Methanol can be added to both slow evaporation/gelling (extend work time) and lower the solution viscosity. Up to 10% methanol is common practice. The following chart depicts solvents and their corresponding evaporation rates that are uses as nitrocellulose solvents. Legend: Acetone evaporates faster than all; Note, the lacquer viscosity listed is based on 1/2 sec nitrocellulose and not the RS 5.0-6.5 sec NC Firefox supplies. Remember, it takes over twice as much 1/4-1/2 sec NC (by weight) to make the same viscosity lacquer when made using our 5.0-6.5 sec NC 4000 series! Formulation Example: the highest viscosity comes from using N-Butyl Acetate (highest molecular wt), but the downside is that it has the slowest evaporation rate thus taking the longest to dry. Therefore, a combination of acetone and ethyl acetate would yield the best properties and require less nitrocellulose to obtain the desired viscosity and dry time.
MOST COMMONLY USED NITROCELLULOSE SOLVENTS & THEIR PROPERTIES
12.3-12.5% N, RS 5.0-6.5 SEC NC 4000 NITROCELLULOSE
Nitrocellulose, Solid 12.3-12.5% Nitrogen
For propellants, lacquers, color flash cellophanes, coatings, sealants, etc..
Special$16.00/lb
Nitrocellulose Lacquers, clear and colors [C6H7N3O11] +[CH3COCH3] 16% butyrate - 5.0-6.5 sec thick concentrated solutions. Our nitrocellulose lacquers are used to seal safety fuse, electric igniters, ignitercord, etc., as well as an excellent pyrotechnic binder for unlimited applications. It burns clean without smoke of its own and does not interfere with color flames or increase ignition points. Completely moistureproof, pliable and dries in seconds. The high solids loadings (16% using 5.0 to 6.5 sec 12% Nitrogen NC, 4000 series) make the slurries very viscous and can be thinned many times for use, depending on application. As an example, »24% NC solids loadings using 5.0 to 6.5 sec NC (listed above) is closer to a gel than a lacquer, taking several days to completely dissolve the NC rather than an hour or two for 16% solids. Other types of NC such as 1/4 sec, make thinner slurries per solids loadings than our 5.0 to 6.5 sec 4000 series. Example; to arrive at the same viscosity as our 16% 5.0 to 6.5 sec slurry, you would need a solids loading of 29% of the 1/4 sec NC and since most commercial NC lacquer slurries incorporate the 1/4 sec NC, be aware of the differences before you choose a supplier. Judge available lacquers by their viscosity and subsequent NC category used rather than the solids loadings. There are differences!! Tie your own flies? This makes an excellent head cement. Hundreds of uses! Compare our prices! Our NC lacquers come in colors as well as clear and are thick concentrate, true »16% solids butyrates 5.0 to 6.5 sec 4000 series (thick syrup) that can be thinned a number of times, at less than half the price of our competition!! **We use acetone only as the solvent. No alcohol is used to thin or cut costs. Methanol may be added to thin and lengthen the drying time slightly if required.
Our NC lacquer is the same concntrate used to coat American made safety fuse, but ours dries a bit faster because we use acetone without any of the slower evaporating solvents such as alcohol or MEK. Adding either of them will thin the lacquer but they also prolong drying time accordingly. If you want a slower drying lacquer but do not want a thinner viscosity to work with, simply add 20% to 30% MEK or Methanol and enough dry NC to bring it back to the desired viscosity. Note; MEK dries faster than methanol.Non-hazmat ORM-D shipping.
16% NC, STANDARD NITROCELLULOSE LACQUERS - CLEAR & COLORS
Nitroguanidine, (NG) wetted with 20% water, Picrite [CH4N4O2] Stock # C163NG
Crystalline solid in water, mainly used to manufacture propellants, notably triple base smokeless propellants. It has also found application in modern smokeless or low smoke pyrotechnic formulations and as an additive to modify burn rates. Nitroguanidine reduces the propellants flame and flash temps without sacrificing chamber pressures. Relatively of low sensitivity, used as an explosive, it is only detonated with a blasting cap and/or booster explosive and has high detonation velocity. It can also be found in insecticides, having a comparable effect to nicotine. Slightly soluble in alcohol. Although shipped as a flammable solid, according to DOT regulations, wet nitroguanidine is considered an explosive and must be stored in an approved explosives magazine. An ATFE is required to purchase nitroguanidine. Hazmat shipping is also required for any quantity. Add this to your inventory of hard to find exhotic chemicals!
$98.00/ lb
$475.00/ 5 lbs
High quality from Germany
Nitrotekâ„¢ Ignitercord Plasticizer, tackified binder / plasticizer solution, Stock #C163NIP - ORM-D
Added to pyrogen mixture for coating cotton string or wire wrapped cotton string for making Imitation Thermaliteâ„¢ and other thermic Ignitercords. It is a modified nitro-plastic based slurry that coats easily and when dry, leaves the ignitercord pliable enough to bend without breaking, ignites easily and burns at high temperatures all by itself. Added to a pyrogen, it makes ignitercord hot enough to ignite raw thermite. Concentrate can be thinned with MEK if needed for use. Makes thousands of feet of ignitercord. Instructions and equipment for making Imitation Thermaliteâ„¢ is in our manufacturing set FIREFOX TABLETOP MATCHMAKING STAND Stock #TSMATCH. Simply add enough Nitrotekâ„¢binder to the pyrogen powder mix to make a batter-like slurry for coating string and/or wire wrapped string.Non-hazmat shipping by UPS or US Mail.
TSMATCH FIREFOX TABLETOP MATCHMAKING STAND with bottles, hardware and instructions
$46.80 (2 lbs)
F522/36 36 awg .005" dia Tinned Copper Ignition Wire
$4.95/25 ft (1 oz)
CS16-2 16-2 100% Cotton String - 3000 yard spoolTemp out
$4.95/3000 ft (8 oz) Temp out
SECITI/FST Fast Imitation Thermaliteâ„¢ Ignitercord Composition
Requires 22 gms KClO4 - makes 130-140 ft 3/32" Ignitercord
Burn rate on cotton string alone - 1 to 1.5 sec/inch, fierce heat
$11.75/tub (8 oz)
Oxalic acid - [C2H2O4] white granular crystal - Stock #C163C1
Used as a rust and stain remover, concentrated cleaner, and to make metal oxalates for pyrotechnic applications. Wikipedia; Oxalic acid is an organic compound with the formula H2C2O4. It is a colorless crystalline solid that dissolves in water to give colorless solutions. It is classified as a dicarboxylic acid. In terms of acid strength, it is much stronger than acetic acid. Oxalic acid is a reducing agent and its conjugate base, known as oxalate (C2O42−), is a chelating agent for metal cations. Used as a rust and stain remover, concentrated cleaner, and to make metal oxalates for pyrotechnic applications. Vaporized oxalic acid, or a 3.2% solution of oxalic acid in sugar syrup, is used by some beekeepers as a miticide against the parasitic varroa mite. Soluble in water, ethanol and diethyl ether.
$8.95/lb
$42.00/5 lb
$79.00/10 lb
Parlon - chlorinated rubber, 68% chlorine donor - Stock #C163E
Soluble in Acetone and Xylene. Used as a binder while supplying chlorine to enrich color flame production. Chlorine deepens the color for vibrant flames.
$13.90/ lb
$62.40/ 5 lbs
PBAN Polymer - polybutadiene/acrylic acid - Stock #C164
Composite polymer (CTPB) using DER-331 epoxy to cure. This one is used as the binder to make the Space shuttle SRB propellant. Used in composite rocket propellants and other similar uses including hybrid fuel grains. Very popular and practically foolproof, taking longer to cure than R-45, the cure temps range from 150 - 200 F. Takes approx 3-4 days @ 170 F. The higher the cure temp, the faster it will cure, as with all CTPB systems. Cure accelerators include Iron Linoleate and other metal catalysts. Literature using PBAN is in our literature section "Composite Color Flames" by Gary Purrington.
Can also be used to make insect sticky paper and hanging strips. Simply paint a thin layer on cardstock or ribbon. Requires no curative for this. Does not dry out - Works Great!
Special Price$45.50/gallon(10 lbs)
Special Price$225.00/5 gallons
(48 lbs)
Phosphorous Pentoxide, [P4O10] Phosphorous Anhydride; Diphosphorous Pentoxide; Phosphorous (V) Oxide. Stock # C164PP
A byproduct of burning phosphorous compounds, P4O10 is a white to yellow crystalline solid (granular) and a powerful desiccant and potent dehydrating agent powerful enough to dehydrate sulfuric acid into sulfur trioxide as well as amides to nitriles. The solid reacts violently with water forming phosphoric acid which is used in applications such as; electrolytes, metal cleaning, rust removal, soldering flux, etchants, cleaning solutions, Ph adjuster, fertilizers and pesticides. Subliming at 580 F, it has potential as a smoke agent in experimental resin composite cover smoke and pesticidal smoke production. Keep containers well sealed in a dry area and store seperate from organic and/or combustible materials. Contaminated with combustible material, it can heat and cause fire with the induction of moisture.
Use for phosphoric acid production, fertilizers, metal etchants, soldering flux, pesticides.............
$21.00/ lb
Phthalocyanine Blue, [C32H16N8Cu] monastral blue, phthalo blue - Stock #C164B
Used to make blue smoke. It can also be used as a burn rate catalyst in rocket propellants. Wikipedia; Phthalocyanine blue (C32H16N8Cu) a complex of copper with phthalocyanine. Molecular mass is 576.08, melting point 600 C (with decomposition), the substance is practically insoluble in water (< 0.1g / 100 ml @ 20C), but soluble in concentrated Sulphuric acid. Density of the solid is ~1.6 g/cc. The color is due to a π-π* electronic transition, with λmax ~ 610 nm. Due to its stability, phthalo blue is also used in inks, coatings, and many plastics. The pigment is insoluble and has no tendency to migrate in the material. It is a standard pigment used in printing ink and the packaging industry.
$36.00/lb
currently out of stock
Polyester Resin - Formrez F17-80, viscous liquid, propellant grade - Stock #C165
CTPB cures with DER-331 epoxy. Cure accelerators include Iron Linoleate and other metal catalysts. Composite flare: 14% F17-80, 3% DER-331, 46% Sodium Nitrate, 37% coated Magnesium such as inexpensive floor sweepings, stock #C157FS. Cure @ 150F. 1.5% Versamid 140 or other epoxy curative will help speed curing.
Special Price$20.00/quart (ship wt 4 lbs)
Special Price $45.50/gal(ship wt 11 lbs)
Polybutadiene R45-M (HTPB) Resin - Stock #C165B
Used in composite rocket propellants and other similar uses including hybrid fuel grains. Room temp cures with Isonate 143-L or at 150° F with IPDI (Isocyanates). Cure accelerators include Dibutyltin Dilaurate, iron linoleate and other metal catalysts.
$24.75/quart (ship wt 3 lbs)
$99.00/gallon (ship wt 8 lbs)
Polypropylene, small chunks, Stock #C165BA
Make clear, elastomeric resin. Disolves in Toluene to make solutions that dry "frosted" in color with a soft rubber-like feel to it. One pound makes 2-4 quarts of solution in toluene. Can be tinted easily with solvent dyes. Great insulation for wire and cord. Popular, inexpensive sealant and insulator!!
$3.50/ lb
$16.40/ 5 lbs
1 lb makes 2-4 qts in Toluene
Polypropylene Resin Solution - Stock #C165BB - ORM
Elastomeric sealant/binder. Clear thick solution in toluene, self cures to a "frosted" coloration with a rubbery feel to it when dry. Can be tinted easily with solvent dyes. Great insulation for wire and cord. Popular, inexpensive sealant and insulator!! Can be added to other solvent vehicle binders to add slight "tack" and better adhesive properties to the cured product.
Special - $13.95/quart
(4 lbs)
Polystyrene Resin - chips, dissolves in toluene to make solutions - Stock #C165B1
Basically plastic granules that dissolve in toluene for use as a strong plastic adhesive and sealant. Used to glue plastic aerial shell halves together and glue time fuse in place. Dries rigid and white in color. Can be tinted with solvent dies or made elastomeric by adding 5% or so plasticizer.
$4.55/ lb
$20.80/ 5 lbs
$39.00/ 10 lbs
Polyvinyl Alcohol - beads, adhesive, add hot water - Stock #C165D
PVA/PVOH adhesive. Simply dissolve in boiling water. Similar to Elmer's glue but dries stronger and crystal clear. Great for gluing plugs and caps in place, wood plugs in mortars, etc.. Can also be used as a water soluble binder in various pyrotechnic mixtures. Simply thin to a water-like viscosity for use here and use up to 4% in pyro mixture. Can be used with other water soluble binders to increase the strength of the dried casting. Use sparingly, too much will inhibit the burn rate. Can be used to make electric squibs (explosive electric match "hits") by dipping finished match head in concentrated solution twice, drying between coats. Very popular inexpensive adhesive!! 1 lb makes up to 3 gallons
of adhesive. The thick glue may then be thinned with water for lower viscosities if needed.
$9.50/ lb
$40.25/ 5 lbs
Polyvinylchloride (PVC) [C2H3Cln] - fine, 56% chlorine donor - Stock #C166
Soluble in MEK, Methylene chloride or cyclohexane. Used as a binder while supplying chlorine to enrich color flame production. Chlorine deepens the color for vibrant flames. PVC is the least expensive of the chlorinating agents and the most popular in use.
$7.15/ lb
$35.10/ 5 lbs
$65.00/ 10 lbs
Potassium Benzoate, Flake/Powder [C6H5COOK.(C6H5KO2) - Stock #C167 No ATFE required to order.
Used in combination with KClO4 for whistles, whistle rockets and burst charce additives. Whistle mix can also be coated on rice hulls for shell bust charges where it increases the combustion heat for higher star ignition reliability. Less hygroscopic than Sodium Benzoate or Salicylate.No need to grind for use. For superrior mixing, dissolve in the least amount of warm water, add oxidizer (usually KClO4), burn rate catalyst (usually 1% red iron oxide), mix well and allow to dry to a thick putty for pressing or ricing through a screen. Adding 2-4% mineral oil or glycerine will plasticize and phlegmatize for pressing.
$10.40/ lb
$47.50/ 5 lbs
$93.15/ 10 lbs
Potassium Benzoate - Air Milled powder[C6H5COOK.(C6H5KO2) - C167AM
Approx. 10 mic powder. Less Hygroscopic than Sodium Benzoate or Salicylate. Used for whistles, whistle rockets, bursts, etc. Fine enough to be mixed as is (air milled powder).
Now restricted under the injunction. Please see our home page under the heading 'please read this before ordering'. ATFE manufacturing permit required to order.
$15.25/ lb
$69.50/ 5 lbs
Potassium Chlorate, Spanish - [KClO3] fine powder - Stock #C168 - OX Now restricted to 1lb per year under the injunction. Please see our home page under the heading 'please read this before ordering'. Caution: friction sensitive - chlorate. out of stock
$6.55/lb
$30.95/5 lb
$58.50/10 lb
Potassium Chlorate, Custom Milled - [KClO3] Stock #C168CM - OX *cannot be shipped by mail. Hazmat by UPS KClO3 is now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Our custom milled oxidizers are only packaged in 5 lb tubs. ATFE manufacturing permit required to order.Currently out of stock
$36.00/ 5 lbs
Milled with Cab-O-Sil (anti cake agent) to keep it free flowing. Minimum qty is 5 lbs.
Potassium Chlorate - [KClO3] domestic high purity powder, 99.3% purity - Stock #C168/HP - OX -NEW! Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$6.65/ lb
$30.95/ 5 lbs
$58.80/ 10 lbs
Potassium Chloride - granular, muriate of potash (88% +100 mesh) - Stock #C168A
Can be used like ammonium chloride for white smoke. Wikipedia; Along with sodium chloride and lithium chloride, potassium chloride is used as a flux for the gas welding of aluminum. Potassium chloride was once used as a fire extinguishing agent, used in portable and wheeled fire extinguishers. Known as Super-K dry chemical, it was more effective than sodium bicarbonate-based dry chemicals and was compatible with protein foam.
$5.85/ lb
$27.50/ 5 lbs
Potassium Dichromate - fine orange crystals - Stock #C169 - PM
Used as a combustion catalyst with chlorates, perchlorates and ammonium nitrate where it lowers the ignition points for easier ignition. It does this by "allowing" the oxidizer to decompose at a lower temperature thus releasing its oxygen to support combustion earlier and increasing the burt rate accordingly. A hot water solution is also used to coat Magnesium and other metals to prevent decomposition.No ATFE required to order.
$10.60/ lb
$48.00/ 5 lbs
$95.00/ 10 lbs
Potassium Iodide, granular - Stock #C169C
For violet & purple flames. Dissolve in methanol for alcohol lamp flames and coating pine cones and similar for color flame firestarters. out of stock
$34.50
$167.50
Potassium Nitrate, Custom Milled - [KNO3] Stock #C170CM - OX
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Our custom milled oxidizers are only packaged in 5 lb tubs. Requires ATFE manufacturing permit to order.
$26.10/ 5 lbs
Milled with Cab-O-Sil (anti cake agent) to keep it free flowing. Minimum qty is 5 lbs.
Potassium Nitrate - [KNO3] fine white powder w/anti-cake - Stock #C170 - OX
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$4.90/ lb
$22.70/ 5 lbs
$41.40/ 10 lbs
$76.80/ 20 lbs
Potassium Nitrate - [KNO3] fine white granular - Stock #C171 - OX
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$4.05/ lb
$19.35/ 5 lbs
$35.65/ 10 lbs
$63.90/ 20 lbs
Potassium Perchlorate, Custom Milled, Spanish[KClO4] PH 7.0 - Stock #C172CM
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Hazmat - *cannot be shipped by mail and requires an ATFE manufacturing permit to order.
$34.80/ 5 lbs
Milled with Cab-O-Sil (anti cake agent) to keep it free flowing. Minimum qty is 5 lbs.
Potassium Perchlorate, Domestic, [KClO4] milled powder, PH 7-7.5 - Stock #C172 - OX
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
This is by far our best selling KClO4.
$5.50/ lb
$25.00/ 5 lbs
$49.00/ 10 lbs
Potassium Perchlorate, Chinese, [KClO4] fine powder - Stock #C172/C - OX Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Out of stock
$6.15/lb
$28.00/ 5 lb
$54.60/ 10 lb
Potassium Perchlorate, Hummel Croton [KClO4] - High Purity (99.5%+ pure), superfine,- Stock #C172HC - OX Very free flowing superfine powder.Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$6.15/ lb
$28.00/ 5 lbs
$54.60/ 10 lbs
Potassium Perchlorate HP-150 - [KClO4] High Purity (99.5%+ pure), superfine powder - Stock #C172HP - OX
Sometimes referred to "Chinese Gourmet". This one is the HP-150 which is finer in particle size than the HP-140 supplied elsewhere. Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Out of stock
$6.15/ lb
$28.00/ 5 lbs
$54.60/ 10 lbs
Potassium Perchlorate, Domestic, B & C ± 4 µ superfines [KClO4] high purity, 99.7% Purity - Stock #C172/HP4 - OX Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Out of stock
$7.65/lb
$35.10/5 lb
$67.80/10 lb
Potassium Perchlorate, Spanish, [KClO4] super fine powder (high purity) - Stock #C172/SP - OX - In High Demand, Very Popular KClO4. Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'. Now Back In Stock!
$7.65/ lb
$35.10/ 5 lbs
$67.80/ 10 lbs
Potassium Perchlorate, Taiwanese High Purity - [KClO4] Stock #C172/TA - OX
Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
Taiwanese KCLO4 (#C172/TA) is ULTRA high purity, passing -300 mesh with less than .05% of impurities for best colors!
$7.65/ lb out of stock
Potassium Perchlorate - Lumpy/Screenings [KClO4] (no anti cake added, you crush it and save!) - Stock #C172LS - OX *cannot be shipped by mail and is hazardous by UPS - (5lbs minimum order). ATFE manufacturing required to purchase. Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$20.00/ 5 lb
Potassium Permanganate - fine granular - Stock #C174 - OX
Use with adequate ventilation and face mask. Used in two part firestarting kits and few other pyrotechnic applications. Now restricted to 1lb under the injunction. Please see our home page under the heading 'please read this before ordering'.
$7.60/ lb
$34.70/ 5 lbs
$66.60/ 10 lbs
Potassium Persulfate, [K2S2O8]; Dipotassium peroxydisulfate; Peroxydisulfuric acid dipotassium salt; Stock # C174PP - OX
Strong water soluble white crystalline oxidizer (oxygen @ 47.35%) used in hundreds of applications including but not limited to; safer alternative to zinc chloride solutions for soldering flux, copper and zinc etchant (dissolve 1 kg in 4 liters water and store in a ventilated glass or plastic container); electroplating; bleaching & whitening applications; initiator for emulsion polymerization; photography; manufacture of aniline dyes and dying; experimantal oxidizer in pyrotechnics and explosives, etc.. No ATFE required to purchase - no quantity restrictions.
$5.50 / lb
$26.00 / 5 lbs
Soluble in water
Propylene Glycol, [C3H8O2]; 1,2-propanediol, propane-1,2-diol, a-propylene glycol; - Stock # C175PG
Propylene glycol is a colorless, nearly odorless, clear, viscous liquid with a faintly sweet taste. It is hygroscopic and miscible with water, acetone, ethanol, diethyl ether and chloroform. It is the main ingredient in products such as fog oil for theatrical fog machines and insecticidal smoke fog oil. It can also be used in pyrotechnic smoke mixtures (especially color smoke mixtures) to prevent dyes from "dusting" into the air and provide more smoke density in combustion, and as a dampening agent to control airborn dusts while mixing. Other uses include; mixing with wax and gelatin in the manufacture of paintballs, in smoke machines to make artificial smoke for use in firefighters' training and theatrical productions, as a wetting agent to control drying times of paints and lacquers, in electronic cigarettes, as a vaporizable base for diluting the nicotine liquid, as a non-toxic antifreeze for winterizing drinking water systems in campers and motor homes, septic systems, etc., to de-ice aircraft and airstrips, as a moisturizer in foodstuffs, medicines, cosmetics, as a solvent for food coloring and flavorings, etc..
.jpg)
CHEMICALS 
.JPG)
